SS1000 Modular Swarf Handling Unit Launched.

13 May 2015

The SS1000 Modular Swarf Handling System® can be placed directly into the rig flow line. This unit is a significant advantage to operators on jobs where there is a major lack of space, such as on ageing offshore platforms or very small jack-up rigs. This system was successfully trialled

13 May 2012

21 June 2010

The ROMAR® SS1000 Swarf Handling Unit was developed and run with a client in the UK Central North Sea. This unit applied new MAGNOVEYOR® technology to remove large quantities of metal debris from fluid, using a safe, hands-free process.

16 September 2008

https://romar-abrado.com/mud-spill-prevention/2008: The first ROMAR® Packer Management System (PMS) was designed, manufactured and installed on a semi-submersible rig to protect against unplanned fluid spills into the ocean.

13 June 2006

The first ROMAR® SS2000 Swarf Handling unit was developed and run on a platform in the UK North Sea. This package was based on an on-mass conveyor with secondary filtration using tube/chain principles.

13 May 2005

The ROMAR® EZ-CLEAN MAGNOROD® Ditch Magnet System Introduced. This technology offered all the operational advantages of the previous MAGNOGRID® system – but with a step-change in safety. Unlike any prior solution, EZ-CLEAN MAGNORODS® do not need to be physically scraped clean. Thus, personnel do not contact sharp metal debris,

13 February 2005

This technology offered all the operational advantages of the previous MAGNOGRID® system – but with a step-change in safety. Unlike any prior solution, EZ-CLEAN MAGNORODS® do not need to be physically scraped clean. Thus, personnel do not contact sharp metal debris, greatly reducing the risk of injury.

13 March 2002

In 2002 ROMAR® introduced the MAGNOGRID® Ditch Magnet System. An innovative bit of kit, the MAGNOGRID® system placed a grid of permanent magnet rods across the full depth and width of a flow channel to recover metallic debris created during milling operations. This system was considerably more effective than

10 August 2000

ROMAR International Ltd was founded by Martin McKenzie and Robbie Gray. Martin and Robbie both worked for operators in the UK North Sea and were intimately aware of the operational and safety challenge presented by the contamination of mud systems with sharp metallic debris. The name ROMAR originates from

News

SS1000 Modular Swarf Handling Unit Launched.

Appointment of Malcolm MacKenzie As General Manager.

ROMAR™ SS1000 with New MAGNOVEYOR® Technology Launched in the North Sea.

ROMAR® PMS™ Launched For Spill Prevention.

SS2000 Swarf Handling Unit Launched In North Sea

ROMAR® EZ-CLEAN MAGNOROD® Ditch Magnet System Introduced.

The ROMAR® EZ-CLEAN MAGNOROD® Ditch Magnet System Introduced

ROMAR® MAGNOGRID Ditch Magnet System Launched.

ROMAR International, Swarf Management Specialists Since 2000.

Contact us

Eastern Hemisphere

Aberdeen, UK

Address:

Phone:

Email:

Western Hemisphere

Broussard, LA, USA

Address:

Phone:

Email: